Repar2 Lathe Chuck Shield - Model PT
Safeguard for lathe with a vertical lifting arm. Lifts up, out of the way to access the chuck. Lathe will not run when the shield is in the open position.
Protects the operator from chips, broken tools and inadvertent contact with the rotating chuck. Unique, vertical lift arm, eliminates the need for the operator to lean over the chuck to open and close the shield.
The shield is fabricated out of steel and polycarbonate. The arm has a gas shock installed for ease of operation. An included, safety microswitch forces the operator to close the shield before the lathe can run.
- Shield height may be adjusted up and down
- Shield adjusts left and right
- Gas shock on arm to ease lifting
- Safety rated switch to improve safety
- 240mm wide (9.50")
- For chuck sizes 300mm to 600mm (12" to 24")
Part Number Shield Size Price PT-300 300mm x 240mm (12" x 9.50") $979.00 PT-350 350mm x 240mm (14" x 9.50") $979.00 PT-400 400mm x 240mm (16" x 9.50") $979.00 PT-450 450mm x 240mm (18" x 9.50") $999.00 PT-500 500mm x 240mm (20" x 9.50") $999.00 PT-600 600mm x 240mm (24" x 9.50") $999.00