Repar2 Drill Press Chip Shield, Interlocked - TR2-SP
The TR2 SP is the same type of guard as the TR2, with a smaller switch and mounting bracket. This allows the screen and arm to be mounted closer to the machine. The TR2 is great for machines that have a very wide head unit or a geared head unit.
This chip shield features an interlock switch for additional safety. When the interlocked shield is moved to the side, the micro switch opens and sends a stop signal to the machine control. The safety switch is mounted in an IP 67 enclosure which makes it difficult to defeat.
These interlocked shields are available for drilling machines in several sizes and styles. The shields are fabricated out of a steel frame and transparent polycarbonate to protect the machine operator from flying chips and coolant.
These shields exceed OSHA and ANSI standards, and comply with EU Machinery Directive 2006/42/CE
- The saw will not operate with an open shield
- Support bracket 60x50mm
- Winged shield provides good visibility
- Shield size 7.87" x 5.12" Screen size (200mm W x 130mm H)
- Approximately 17" of vertical adjustability - Adjust height with thumb screw
- Download the schematic diagram
Part # Description Price TR2-SP Band saw chip shield - complete $459.00 TR2-SP-SCR Replacement shield - Only $39.00
Questions? E-mail Us or give us a ring at 1-651-707-9594 for more information. We are happy to answer any questions.